Kia Sorento: Side Impact Sensor (SIS) Description
Side Impact Sensor (SIS) system consists of two Front-SIS which are installed
at each center of the front door module (LH and RH) and two Rear-SIS which are
installed at each rear pillar nearby (LH and RH).
Front-Side Impact Sensor (F-SIS) is also called P-SIS because that detects
pressure due to collision at its mounting location.
Rear-Side Impact Sensor (R-SIS) is also called A-SIS because that detects
acceleration.
SRSCM decides deployment or not of the airbag and the time of deployment
through the collision signal of SIS when the collision occurred.
•
Do not turn the ignition switch ON and do not contact
the battery cable while replac ...
See also:
SS-A Solenoid Valve(ON/OFF)
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
SS-A Solenoid valve(ON/OFF) is installed at valve body.
...
Thermostat Inspection
1.
Immerse the thermostat in water and gradually heat the water.
2.
Check the valve opening temperature.
Valv ...
Circuit Diagram
...