Kia Sorento: Shift Lever Removal - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Shift Lever Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Removal

1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Remove the air duct.
3.
Disconnect the sports mode connector (A).

4.
Disconnect the shift cable (A).

5.
Remove the shift lever assembly (A) by removing the bolts (C-4ea).

Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Shift Lever Components
1. Shift lever mounting bolt 2. Shift lever assembly 3. Shift cable assembly 4. Shift lever knob & boots assembly 5. Manual control lever 6. Retainer ...

Shift Lever Installation
1. Install in the reverse order of removal.    Set shift lever and inhibitor ...

See also:

Component
...

Parking brake
Applying the parking brake Foot type To engage the parking brake, first apply the foot brake and then depress the parking brake pedal down as far as possible. Hand type To engage the parking ...

Rear Differential Carrier Disassembly
Rear differential carrier disassembly 1. Drain oil by removing the drain plug (A) and filler plug (B) before disassembling the rear differential carrier. ...

Copyright В© www.ksmanual.com 2014-2024