Adjusting method for T/M control cable |
1. |
Set room side shift lever and T/M side manual control lever to
"N" position.
|
2. |
Connect room side shift lever and shift cable.
|
3. |
Push cable to "F" direction shown to eliminate FREE PLAY.
|
4. |
Tighten adjusting nut (A).
|
5. |
After adjusting according check to be sure that this part operates
surely at each range of T/M side corresponding to each position of shift
lever.
|
Rear Disc Brake Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Side Impact Sensor (SIS) Removal
Front Side Impact Sensor
•
Removal of the airbag must be performed according to ...
Seat Belt Pretensioner (BPT) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...