Kia Sorento: Seat Belt Pretensioner (BPT) Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Restraint / Seat Belt Pretensioner / Seat Belt Pretensioner (BPT) Removal
| 1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the emergency fastening device cover pad (A). [Driver only]
|
| 3. |
Remove the seat belt after pushing the lock pin with a fiat-tip
screwdriver (B).
|
| 4. |
Remove the door scuff trim. (Refer to the Body group- Interior
trim)
|
| 5. |
Remove the center pillar trim. (Refer to the Body group- Interior
trim)
|
| 6. |
Remove the seat belt upper mounting bolt.
|
| 7. |
Loosen the seat belt pretensioner mounting bolt (A, B) and remove
the seat belt pretensioner.
|
| 8. |
Disconnect the seat belt pretensioner connector.
|
Seat Belt Pretensioner (BPT) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Release the residual pressure in fuel line.
(Refe ...
Circuit Diagram
Connector Pin Information
No.
Wire harness connector
Panorama motor
Blind motor
1
Ground 1 ...
Automatic climate control system (If equipped)
1. A/C display
2. Driver's temperature control knob
3. AUTO (automatic control) button
4. Front blower OFF button
5. Front fan speed control switch
6. Mode selection button
7. Dual tempera ...
Copyright В© www.ksmanual.com 2014-2024