1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
3. |
Remove the airbag module. (Refer to Restraint - "Driver Airbag
(DAB) Module and Clock Spring")
|
4. |
Disconnect the connector & lock nut (A) and then remove the steering
wheel by using special service tools (09561-11001).
|
5. |
Installation is the reverse of the removal.Removal
|
Compressor Installation
1.
Make sure the compressor mounting bolt with the correct length
is screwed in. Tighten the mounting bolts with the specified tightening
order.
...
Compressor Disassembly
1.
Remove the engine room under cover by loosening the mounting clip
(A) and bolts (B).
2.
Separate the front portion of the front ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A) after removing
3 screws.
...