Kia Sorento: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the variable intake solenoid valve connector (A).
|
| 3. |
Disconnect the vacuum hoses (B,C) from the valve.
|
| 4. |
Remove the installation bolt (D), and then remove the valve from
the surge tank.
|
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve ...
Installation
•
Install the component with the specified torques.
•
...
See also:
Rear Door vReplacement
Door Trim Replacement
•
When prying with a flat-tipped screwdriver, wrap it with
p ...
Components Location
Supplemental Restraint System Control
Module (SRSCM)
Driver Airbag (DAB) / Passenger Airbag
(PAB)
Side Airbag (SAB)
Curtain Airbag (CA ...
Specifications
Front Suspension
Item
Specification
Suspension Type
Macpherson Strut
Shock absorber
Type
H.P.D (High Performance Damper)
C ...
Copyright © www.ksmanual.com 2014-2024