1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the engine coolant temperature sensor connector (A).
|
3. |
Remove the spring clip (A), and then pull the sensor from the
water temperature control assembly.
|
Components
1. Camshaft bearing cap
2. Camshaft front bearing cap
3. Exhaust camshaft
4. Intake camshaft
5. Exhaust CVVT assembly
6. Intake CVVT assembly
7. Exhaust camshaft upper ...
Canister Inspection
1.
Check for the following items visually.
A.
Cracks or leakage of the canister
B.
Loose connectio ...
Driver Airbag (DAB) Module and Clock Spring Installation
1.
Set the front tires straight-ahead before assembling the steering
wheel.
...