Kia Sorento: Removal
| 1. |
Remove the tailgate trim in the trunk after removing the screws
and clips.
(Refer to Body - "Tailgate")
|
| 2. |
Remove the tailgate garnish (A) after disconnecting the connector.
|
| 3. |
Remove the back view camera (A) after removing the screws (2EA).
|
Description
Back view camera will activate when the backup light is ON with the ignition
switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehic ...
Installation
1.
Install the back view camera.
2.
Install the tailgate garnish and trim.
...
See also:
Rear combination lamp Removal
1.
Disconnect the negative (-) battery terminal.
[Outside]
2.
Loose the screws (2EA) holding the rear combination lamp then
disconn ...
Troubleshooting
1.
No windows operate from the main switch on the driver's door.
2.
Driver's side window does not operate.
...
IMS module Removal
1.
Remove the negative (-) battery terminal.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat")
...
Copyright В© www.ksmanual.com 2014-2024