Kia Sorento: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering column upper and lower shrouds.
(Refer to Steering System - "Steering column")
|
| 3. |
Remove the crash pad lower panel.
(Refer to Body - "Crash pad")
|
| 4. |
Remove the ignition switch (A) after disconnecting the 6P connector
(A).
|
| 5. |
Remove the key warning and immobilizer connector (A).
|
| 6. |
Remove the key illumination lens (A).
|
| 7. |
Remove the key illumination bulb and cover (A).
|
| 8. |
If it is necessary to remove the key lock cylinder (A), remove
the key lock cylinder with key ACC.
|
Inspection
1.
Disconnect the ignition switch connector (B) and key warning switch
connector (A) from under the steering column.
2.
Che ...
Installation
1.
Install the key lock cylinder.
2.
Install the illumination bulb, lens and cover.
3.
Install the key warning ...
See also:
Engine And Transmission Assembly Removal
•
Use fender covers to avoid damaging painted surfaces.
•
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the crankshaft position sensor connector (A).
...
Cooling Fan Components
1. Upper air guard
2. Cooling fan control module
3. Cooling fan shroud
4. Fan motor
5. Cooling fan
...
Copyright © www.ksmanual.com 2014-2024