Kia Sorento: Removal
| 1. |
Remove the mirror wiring cover (A).
|
| 2. |
Remove the mirror mounting screw (A) and connector (B).
|
| 3. |
Remove the mirror (A) pulling up in the arrow direction.
|
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cov ...
Installation
1.
Install the mirror making sure the mounting bracket not to be
damaged.
2.
Install the mirror wiring cover after reconnecting the connect ...
See also:
Specifications
Item
Specifications
Transaxle type
A6LF2
Engine model
Gasoline 3.3 GDI
Torque converter type
3-element, 1-stage, 2 ...
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Specifications
Smart Key Unit
Items
Specification
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temperature
-22°F ~ 167°F ...
Copyright © www.ksmanual.com 2014-2024