1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the steering column upper and lower shrouds (A) after removing
3 screws.
|
3. |
Disconnect the light switch connector (A) and the wiper switch
connector (B).
|
4. |
Remove the wiper switch (A) by pushing the lock pin (B).
|
5. |
Remove the steering wheel.
(Refer to Steering System - "Steering column and shaft")
|
6. |
Remove the clock spring.
(Refer to Restraint - "Airbag module")
|
7. |
Loosen the screws from the multifunction switch assembly (A).
|
Cylinder Block Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
...
Immobilizer Control Unit Installation
1.
Install the immobilizer control unit after connecting the unit
connector.
2.
Install the crash pad lower panel.
...
Dynamic Damper Removal
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refe ...