1. |
Remove the condenser.
|
2. |
Remove the cap (B) on the bottom of the condenser with a L wrench
(A).
|
3. |
Remove the receiver-drier (A) from condenser using a long nose
plier. Check for crumbled receiver-drier and clogged bottom cap filter.
|
4. |
Apply air conditioning compressor oil along the O-rings and threads
of the new bottom cap.
|
5. |
Insert a new receiver-drier into the receiver drier tank. The
receiver-drier must be sealed in vacuum before it is exposed to air
for use.
|
6. |
Install a new bottom cap to the condenser.
|
Components Operations
PCM (Power Train Control Module)
1.
The PCM(ECM)(A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transpond ...
Interior B
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Oil Cooler Removal
1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap
to help drain the coolant faster.
2.
Disconnect the oil cooler coo ...