Kia Optima Manuals

Kia Sorento: Rear Wiper Motor Installation - Rear Wiper/Washer - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Rear Wiper Motor Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Rear Wiper/Washer / Rear Wiper Motor Installation

1.
Install the rear wiper motor assembly.
Tightening torque Nut :
7 ~ 11 N.m (0.7 ~ 1.1 kgf.m, 5 ~ 7.9 lbf-ft)
2.
Install the tailgate trim.
3.
Install the rear wiper arm and rear wiper cap.
Tightening torque Nut(B) :
4 ~ 7 N.m (0.4 ~ 0.7 kgf.m, 2.9 ~ 5.0 lbf-ft)
4.
Install the rear wiper arm and blade to align with black rear defogger line (A).
5.
Set the rear washer nozzle on the specified spray position.

Specified position
 Distance (in)
 Distance (mm)
A
 1.57
 40
B
 3.18
 81
C
 8.66
 220
D
 6.61
 168
E
 8.97
 228

Rear Wiper Motor Removal
1. Detach the rear wiper cap (A). 2. Remove the rear wiper arm & blade (A) after removing rear wiper HEX nut (B). ...

Rear Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Rear Wiper Switch Rear Washer Swi ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV termina ...

Power Door Mirror Switch Inspection
1. Remove the front door trim and power door mirror switch module (A). (Refer to Body - "Front door") 2. Check fo ...

Specifications
ON/OFF Solenoid Valve(SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

Categories


Copyright В© www.ksmanual.com 2014-2024