Kia Sorento: Rear Washer Switch Inspection

Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch.

Rear Wiper Motor Installation

1. Install the rear wiper motor assembly. Tightening torque Nut : 7 ~ 11 N.m (0.7 ~ 1.1 kgf.m, 5 ~ 7.9 lbf-ft) ...

Rear Washer Motor Inspection

1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.    ...

See also:

Head Lamps Component (1)
1. Head lamp assembly 2. Head lamp high beam bulb 3. Head lamp low beam bulb 4. Dust cap 5. Turn signal lamp socket & bulb ...

Circuit Diagram
...

Fuel Pressure Regulator Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Release the fixing hooks, and then remove the regulator c ...