Kia Sorento: Rear Oil Seal Installation - Cylinder Block - Engine Mechanical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Rear Oil Seal Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Cylinder Block / Rear Oil Seal Installation

1.
Install rear oil seal.
(1)
Apply engine oil to a new oil seal lip.
(2)
Using SST(09231-H1100, 09214-2W200) (B) and a hammer, tap in the oil seal (A) until its surface is flush with the rear oil seal retainer edge.

2.
Install the drive plate.
(Refer to Cylinder Block - "Drive Plate")
3.
Install the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Rear Oil Seal Removal
1. Remove the automatic transaxle. (Refer to Automatic Transaxle System - "Automatic Transaxle") 2. Remove the drive plate. ...

Ladder Frame Removal
   • Use fender covers to avoid damaging painted surfaces. • ...

See also:

Power Tailgate Unit Installation
1. Install the power tailgate unit. 2. Install the rear left luggage side trim. 3. Connect the negative (-) bat ...

Side Airbag (SAB) Module Components
...

Specifications
ON/OFF Solenoid Valve(SS-A) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

Copyright © www.ksmanual.com 2014-2024