1. |
Remove the rear wheel and tire (A) from rear hub .
|
2. |
Support the rear lower arm (A) with a jack as shown in the illustration.
|
3. |
Loosen the bolt & nut and then remove the rear lower arm (A) with
the rear axle.
|
4. |
Loosen the bolt & nut and then remove the rear lower arm (B) with
the sub frame (A).
|
5. |
Installation is the reverse of removal.
|
6. |
Check the wheel Alignment.
(Refer to Tires/Wheels - "Alignment")
|
Installation
1.
Install in the reverse order of removal.
Accelerator pedal module installation
nut:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18 ...
EBD (Electronic Brake-force Distribution)
The EBD system (Electronic Brake force Distribution) as a sub-system of
the ABS system is to control the maximum braking effectiveness by the rear wheels.
It further utilizes the efficiency ...
Special Tools
Tool (Number and name)
Illustration
Use
09977-3R000
Disc & hub assembly bolt remover
Removal and installation of disc & hub assembly ...