1. |
Remove the front wheel and tire (A) from front hub.
|
2. |
Remove the rear brake caliper.
(Refer to Brake System - "Rear Disc Brake")
|
3. |
Remove the wheel speed sensor (A), from the knuckle.
|
4. |
Remove the coking nut (A).
|
5. |
Remove the parking brake cable.
(Refer to Brake System - "Parking Brake Cable")
|
6. |
Remove the rear upper arm (A) after loosen the bolt (B).
[2WD]
[4WD]
|
7. |
Remove the rear strut assembly (C) after loosen the bolt (B) and
nut (A).
|
8. |
Remove the rear lower arm (B), spring (C) as loosening bolt (A)
after supporting rear lower arm (B) with jack.
|
9. |
Remove the rear assist arm (C), trailing arm (D) as loosening
bolt (A), nut (B).
[2WD]
[4WD]
|
10. |
Separate the end (B) of rear driveshaft on rear axle assembly
(A).
|
11. |
Install in the reverse order of removal.
|
12. |
Check the wheel alignment.
(Refer to Suspension System - "Alignment")
|
Audio Remote Control Components
...
Occupant Detection system (ODS) Description
In order to make normal activation of airbag system, SRSCM detects DTC(s)
for the Passenger side Body Detection System. If the seat is occupied, Body
sensor detects how measuring electrostati ...
Audio Head Unit
(1)
(EJECT)
Ejects the disc.
(2)
Changes to FM/AM/SIRIUS mode.
Each time the key is pressed, the mode is changed in order of FM1 ➟ FM2 ➟ AM
➟ SAT1 ➟ SAT2 ...