Kia Sorento: Rear Hub - Carrier Disassembly
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier Disassembly
| 1. |
Remove the hub assembly mounting bolts (A-4ea) from the rear axle
carrier (B).
|
| 2. |
Remove the hub assembly (C) and the parking brake assembly (B)
from the rear axle carrier (A).
|
| 3. |
Assembly is the reverse order of disassembly.
|
Rear Hub - Carrier Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Rear Hub - Carrier Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the rear axle carrier for cracks.
...
See also:
Air Ventilation Seat Control Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the air ventilation seat control unit (A) after loosening
screws.
...
Front Body E
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Hood hinge m ...
Occupant Detection system (ODS) Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front passenger seat ass ...
Copyright В© www.ksmanual.com 2014-2024