Kia Sorento: Rear Disc Brake Replacement
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Brake System / Rear Disc Brake Replacement
| 1. |
Remove the rear wheel & tire.
|
| 2. |
Loosen the guide rod bolt (B) and pivot the caliper (A) up out
of the way.
|
| 3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
| 4. |
Compress the piston into the caliper body using the SST (09581-11000).
|
| 5. |
Place the caliper body (A) on the caliper carrier and tighten
the guide rod bolt (B).
|
| 6. |
Install the rear wheel & tire.
|
Rear Disc Brake Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Rear Disc Brake Inspection
Rear Brake Disc Thickness Check
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
...
See also:
Components (1)
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
4. Seat Belt Pretensioner (BPT)
5. Front Side Impact Sensor (FSIS)
6. Side Airbag (SAB)
7. Passenger Airbag (PAB)
...
Component Location
1. Auto light sensor
2. Head lamps
3. Lighting switch (Auto)
4. Tail lamps
5. IPM (Intelligent intergrated Platform Module)
...
Shift Cable Removal
1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Remove the air duct.
3.
Dis ...
Copyright В© www.ksmanual.com 2014-2024