1. |
Installation is the reverse of removal.
|
2. |
Compress the piston into the caliper body using the SST (09581-11000).
|
3. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
|
Troubleshooting, Customer Complaint Analysis Check Sheet
There are six areas where a problem can occur: wiring harness, the radio,
the CD player, and speaker. Troubleshooting enables you to confine the problem
to a particular area.
Chart 1 ...
Starter Relay Inspection
1.
Disconnect the battery negative terminal.
2.
Remove the fuse box cover.
3.
Remove the starter relay(A).
...