1. |
Drain oil by removing the drain plug (A) and filler plug (B) before
disassembling the rear differential carrier.
|
2. |
Using the SST(09530-3T300), hold the differential assembly safely.
|
3. |
Remove the air breather plug (A).
|
4. |
Loosen the cover bolts (A-8EA) and then remove the cover (B).
|
5. |
Loosen the bolts (A-4EA) and then remove the bearing cap (B).
|
6. |
Remove the gear carrier assembly (A).
|
7. |
Mark the left and right side bearing race as below when removing
the differential assembly to distinguish the sides.
|
8. |
Using the screwdriver, remove the left and right side oil seal
(A).
|
1. |
Loosen the seal bolts and then remove the gear carrier (A) and
ring gear (B).
|
2. |
Using the SST (09530-3T200) remove the front and rear bearing
(A).
|
3. |
Mark the left and right side bearing as below when removing the
bearing to distinguish the sides.
|
1. |
Using the SST(09530-3T300), fix the differential carrier assembly.
|
2. |
Fix the SST (09530-2W300) on the lock nut.
|
3. |
Fix the flange fix (A) on the SST (095302W300).
|
4. |
Insert the SST (095302W400) to the hole of the hexagon and then
remove the lock nut (A).
|
5. |
Using the screwdriver, remove the pinion oil seal (A).
|
6. |
Press the drive gear and remove the pinion front bearing (A).
|
7. |
Using a hammer and chisel, remove the pinion bearing outer race
(A).
|
8. |
Using the SST (09527-4A000), press the pinion drive gear and then
remove the pinion bearing spacer (A), the inner bearing (B), Inner bearing
adjustment shims (C) in the order.
|
Fuel Tank Air Filter Installation
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped.
In this case, u ...
Parking Brake Lever Assembly Installation
1.
Install the parking brake lever assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
Description
Evaporative Emission Control System prevents fuel vapor stored in fuel
tank from vaporizing into the atmosphere. When the fuel evaporates in the fuel
tank, the vapor passes through vent hoses ...