Kia Sorento: Rear Coil Spring Removal - Rear Suspension System - Suspension System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Rear Coil Spring Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Suspension System / Rear Suspension System / Rear Coil Spring Removal

1.
Remove the rear wheel and tire (A) from rear hub .

Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

  
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

2.
Support the rear lower arm (A) with a jack as shown in the illustration.
  
Certainly install Jack as being danger because of the tension.

3.
Remove the spring (A), the upper pad (B) and the lower pad (C).

Tightening torque :
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

4.
Installation is the reverse of removal.
5.
Check the wheel Alignment.
(Refer to Tires/Wheels - "Alignment")
Rear Lower Arm Inspection
1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. ...

Rear Coil Spring Inspection
1. Check the spring for distortion, aging or damage. 2. Check the spring upper pad and lower pad for aging or damage. ...

See also:

Parking Brake Assembly Removal
Parking Brake Shoe 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear tire and wheel. 3. ...

Component Location
1. Rear wiper arm & blade 2. Tailgate glass hole 3. Grommet 4. Rear wiper arm nut 5. Rear wiper motor assembly 6. Head cap 7. Rear wiper motor bolt ...

Catalytic Converter Description
The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx). [WCC] ...

Copyright В© www.ksmanual.com 2014-2024