1. |
Disconnect the negative (-) battery terminal.
|
2. |
Recover the refrigerant with a recover/recycling/charging station.
|
3. |
When the engine is cool, drain the engine coolant from the radiator.
|
4. |
Remove the rear luggage side trim.
(Refer to Body - "Interior Trim")
|
5. |
Remove the blower motor (B) after disconnecting the blower motor
connector (A) and loosening the mounting screws.
|
6. |
Install in the reverse order of removal.
|
4WD ECU Circuit Diagram and Connector
4WD ECU Connector
Pin
Function
1
MOTOR A
2
MOTOR B
3
LOCK MODE SWITCH (Input)
4
-
...
Mode Control Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the driver's side crash
pad side cover.
...