Kia Sorento: Rear Assist Arm Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Suspension System / Rear Suspension System / Rear Assist Arm Removal
| 1. |
Remove the rear wheel and tire (A) from rear hub .
|
| 2. |
Remove the sprit pin and castle nut or bolt and then disconnect
the rear assist arm (A) from the rear axle.
[2WD]
[4WD]
|
| 3. |
Loosen the bolt & nut and then remove the rear assist arm (A)
with the sub frame.
[2WD]
[4WD]
|
| 4. |
Installation is the reverse of removal.
|
Trailing Arm Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Rear Assist Arm Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the rear assist arm for deformation.
...
See also:
Description
System Overview
The System offers the following features:
-
Human machine interface through a 1-stage button, for terminal
switching and engine start.
...
CVVT & Camshaft Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calculated by the engine ...
Occupant Detection System (ODS)
Your vehicle is equipped with an occupant detection system in the front passenger's
seat.
The occupant detection system is designed to detect the presence of a properly-seated
front passenger ...
Copyright В© www.ksmanual.com 2014-2024