Kia Sorento: Quarter Fixed Glass Removal
•
|
Put on gloves to protect your hands.
|
•
|
Take care not to body surface and other parts.
|
|
1. |
Remove the following parts.
A. |
Second row seat assembly
|
B. |
Third row seat assembly
|
|
2. |
Loosen the quarter fixed glass (A) mounting nut.
Tightening torque :
5.9 ~6.4N.m (0.6~0.65Kgf.m, 4.3~4.7lb-ft)
|
|
3. |
Cut out the sealant using the sealant cutting tool (09861-31100).
• |
Do not scrape down to the painted surface of the
body; damaged paint will interfere with proper bonding.
|
• |
Remove the rubber dam and fastereners from the
body.
|
• |
Mask off surrounding surfaces before painting.
|
|
|
4. |
Remove the quarter fixed glass.
|
1.
With a knife, scrape the old adhesive smooth to a thickness of
about 2mm (0.08 in.) on the bonding surface around the entire windshield
opening flange :
...
1.
With a putt knife, scrape the old adhesive smooth to a thickness
of about 2mm (0.08 in.) on the bonding surface around the entire quarter
fixed glass flange.
...
See also:
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...
Troubleshooting
Problem
Possible cause
Solution
Not pairing
Bluetooth device of Car is not discoverable mode
Enter Bluetooth pairing (searching) mode
Userâ ...
Vehicle data collection and event data recorders
This vehicle is equipped with an event data recorder (EDR). The main purpose
of an EDR is to record, in certain crash or near crash-like situations, such as
an air bag deployment or hitting a road o ...