1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the tailgate trim and Luggage side trim.
(Refer to the Body - "Tailgate")
|
3. |
Disconnect the power PTG spindle connector (A).
|
4. |
Using a screwdriver (A), lift up slightly the socket clips (B)
of both ends on the lifer (D), and then remove the PTG spindle from
the bracket (C).
|
5. |
If it is necessary, remove the nuts and replace the PTG spindle
bracket (A).
|
Power windows
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window.
The driver has a power window lock button which ...
Smart key precautions
The smart key will not work if any of the following occur: The smart key
is close to a radio transmitter such as a radio station or an airport which
can interfere with normal operation of the s ...
Specification
Temperature
Resistance (kΩ)
°C
°F
-40
-40
40.93 ~ 48.35
-20
-4
13.89 ~ 16.03
0
32
...