Kia Sorento: Propeller Shaft Removal and Installation - Propeller Shaft Assembly - Driveshaft and axle - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Propeller Shaft Removal and Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Driveshaft and axle / Propeller Shaft Assembly / Propeller Shaft Removal and Installation

1.
After making a match mark on the flange yoke and transfer companion, remove the propeller shaft mounting bolts (A).

Tightening torque:
49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft)

2.
Remove the center bearing bracket (A) mounting bolts (B-2ea).

Tightening torque:
49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft)

3.
After making a match mark on the flange yoke and 4WD coupling companion, remove the propeller shaft mounting bolts (A).

Tightening torque:
49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft)

  
Do not reuse bolts.

4.
Install in the reverse order of removal.
  
•
When assembl ying propeller shaft, locate marks on flange yoke and T/M transfer flange to be nearly the same loacation.
Propeller Shaft Components
1. Front propeller shaft 2. Center bearing bracket 3. Rear propeller shaft ...

Differential Carrier Assembly
...

See also:

Driving with a trailer
Towing a trailer requires a certain amount of experience. Before setting out for the open road, you must get to know your trailer. Acquaint yourself with the feel of handling and braking with the ad ...

AVN Head Unit Removal
   • Take care not to scratch the center fascia panel and related parts. ...

Air Ventilation Seat Control Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the air ventilation seat control unit (A) after loosening screws. ...

Copyright © www.ksmanual.com 2014-2024