Kia Sorento: Pressure Sensor Installation

Pressure Sensor Removal

1. Remove the coupling assembly. (Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator Coupling") 2. Remove th ...

Driveshaft and axle

...

See also:

Transaxle Oil Temperature Sensor Installation
1. Install in the reverse order of removal.    • ...

Room Lamp Removal
[General] 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver t ...

Engine Control Module (ECM) Installation
1. Install in the reverse order of removal. ECM installation bolt: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m,7.2 ~ 8.7 lb-ft) ECM ...