Kia Sorento: Pressure Sensor Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor Inspection
If you have trouble code related to the pressure sensor check
pressure sensor according to the inspection process.
|
| Pressure Sensor Inspection Procedure |
| Measure the resistance of pressure sensor |
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the pressure sensor connector.
|
| 3. |
Measure resistance between sensor terminal and terminal.
|
| 4. |
Check the measured resistance. (Refer to table)
|
Pressure Sensor Removal
1.
Remove the coupling assembly.
(Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator
Coupling")
2.
Remove th ...
See also:
Audio Remote Control Removal
1.
Remove the driver airbag module.
(Refer to Restraint - "Airbag module")
2.
Remove the steering wheel front cover (A) after ...
Tail Gate Adjustment
1.
After loosening the tailgate hinge (A) mounting bolt, adjust the
tailgate by moving it up or down, or right or left.
2.
Adjust the tailg ...
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Install the start/stop button cover.
3.
Install the crash pad lower panel. ...
Copyright © www.ksmanual.com 2014-2024