1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim and power window switch.
(Refer to Body - "Front door")
|
3. |
Check for continuity between the terminals in each switch position
according to the table. If the continuity condition is not normal, replace
the switch.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim and power window switch.
(Refer to Body - "Front door")
|
3. |
Check for continuity between the terminals in each switch position
according to the table. If the continuity condition is not normal, replace
the switch.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the rear door trim.
(Refer to Body - "Rear door")
|
3. |
Remove the rear power window switch module (A).
|
4. |
Check for continuity between the terminals in each switch position
according to the table. If the continuity condition is not normal, replace
the switch.
[IMS]
[General]
|
SRS Care
The SRS is virtually maintenancefree and so there are no parts you can safely
service by yourself. If the SRS air bag warning light does not illuminate, or continuously
remains on, have your vehicle ...
Specifications
Item
Specification
Power source
DC 14.4V (-) ground
Frequency range / Channel space
FM : 87.5 ~ 107.9 MHz / 200 KHz
AM : 530 ~ 1710 KHz / 10 KH ...
Rear parking assist system (If equipped)
The rear parking assist system assists the driver during backward movement of
the vehicle by chiming if any object is sensed within a distance of 47 in. (120
cm) behind the vehicle.
This system i ...