Kia Sorento: Power Tailgate Latch Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Latch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
After loosening the mounting screws, then remove the tailgate
trim (A).
(Refer to the Body - "Tailgate")
|
| 3. |
Remove the tail gate latch assembly (A) after loosening the mounting
bolts.
|
| 4. |
Loosen the PCU (Power Closing Unit) mounting nuts.
|
| 5. |
Disconnect the power tailgate latch connector (A) and PCU connector
(B).
|
| 6. |
Remove the power tailgate latch & PCU assembly (A).
|
Power Tailgate Unit Installation
1.
Install the power tailgate unit.
2.
Install the rear left luggage side trim.
3.
Connect the negative (-) bat ...
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
See also:
Auto Defogging Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto defogging sensor cover (A).
3.
Disconnect t ...
Seat Belt Buckle Switch (BS) Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
1.
...
Brake Pedal Inspection
1.
Check the bushing for wear.
2.
Check the brake pedal for bending or twisting.
3.
Check the brake pedal retur ...
Copyright В© www.ksmanual.com 2014-2024