Kia Sorento: Power Tailgate Latch Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Tailgate Module / Power Tailgate Latch Inspection
Power Tailgate Inspection With GDS
| 1. |
Check the power Tailgate module input/output value by using the
GDS. If the operation of power Tailgate module is abnormal, replace
power trunk drive unit.
|
| 2. |
To check the DTC of the power trunk module, select "PTM"
|
| 3. |
Select "Input/output monitoring".
|
Power Tailgate Latch Installation
1.
Install the power tailgate latch & PCU assembly.
2.
Install the tailgate trim.
3.
Connect the negative ( ...
Anti-Pinch Strip Removal
1.
Disconnect the negative (-) battery terminal.
2.
After loosening the mounting screws, then remove the tailgate
side trim (A).
(R ...
See also:
Rear Oil Seal Removal
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
...
Sub Frame Removel
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Front Oil Seal Removal and Installation
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pullty")
2.
Remove the front oil seal(A). ...
Copyright В© www.ksmanual.com 2014-2024