Kia Sorento: Power Seat Motor Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Seat Electrical / Power Seat Motor Inspection
Power Seat Motor
| 1. |
Disconnect the connectors for each motor.
(Refer to Body - "Front seat")
|
| 2. |
With the battery connected directly to the motor terminals, check
if the motors run smoothly.
|
| 3. |
Reverse the connections and check that the motor turns in reverse.
|
| 4. |
If there is an abnormality, replace the motors.
|
Component Location
1. Slide motor
2. Front height motor
3. Rear height motor
4. Lumber support motor
5. Power seat switch
6. Reclining motor
7. Reclining switch
8. Lumber support swit ...
Power Seat Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
See also:
Water Temperature Control Assembly Removal
1.
Disconnect the battery negative terminal.
2.
Loosen the drain plug and drain the engine coolant.
3.
Remove ...
Compressor Disassembly
1.
Remove the engine room under cover by loosening the mounting clip
(A) and bolts (B).
2.
Separate the front portion of the front ...
Component Location
1. Horn switch
2. Horn relay (Engine room compartment)
3. Horn (Low pitch)
4. Horn (High pitch)
5. Clock spring
...
Copyright В© www.ksmanual.com 2014-2024