Kia Sorento: Power Seat Control Switch Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Seat Electrical / Power Seat Control Switch Inspection
| 1. |
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat switch.
|
Power Seat Motor Inspection
Power Seat Motor
1.
Disconnect the connectors for each motor.
(Refer to Body - "Front seat")
2.
With the b ...
Power Seat Control Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the power seat control switch (A).
(Refer to Body - "Front seat")
...
See also:
Using Voice Recognition
Starting Voice Recognition
Shortly press the key on the steering
wheel. Say a command
If prompt feedback is in [ON], then the system will say “Please say a command
after the beep (BEEP)”
...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged
if the lights are left in the ON position. The system automatically shuts off
the parking lights 30 seconds after the ...
Rear Hub - Carrier Components
1. Rear carrier assembly
2. Parking brake assembly
3. Rear hub assembly
4. Rear brake disc
...
Copyright © www.ksmanual.com 2014-2024