Kia Sorento: Power Mosfet (DATC) Replacement
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Blower / Power Mosfet (DATC) Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the passenger side crash pad under cover (A).
|
| 3. |
Disconnect the connector and then remove the power mosfet (A)
after loosening the mounting screws.
|
| 4. |
Install in the reverse order of removal.
|
Power Mosfet (DATC) Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower
resistor must be rep ...
Climate Control Air Filter Description
The climate control air filter is located in the blower unit. It eliminates
foreign materials and odor. The particle filter performs a role as an odor filter
as well as a conventional dust fi ...
See also:
Compass Mirror Calibration Procedure
If the compass has been calibrated or set to variance zone number incorrectly,
or you are driving in specific places (tunnel, parking lot in building, underground
parking lot, near transforme ...
For safe All-wheel drive operation
WARNING - Four-wheel driving
The conditions of on-road or off-road that demand fourwheel drive mean all
functions of your vehicle are exposed to extreme stress than under normal road conditions.
Sl ...
Shift Lever Components
1. Shift lever mounting bolt
2. Shift lever assembly
3. Shift cable assembly
4. Shift lever knob & boots assembly
5. Manual control lever
6. Retainer
...
Copyright В© www.ksmanual.com 2014-2024