1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the driver door module.
(Refer to Body - "Front door")
|
3. |
Disconnect the connector from the mirror.
|
4. |
Verify that the mirror operates properly as shown in the table.
Mirror Heater
Turn Signal Lamp
BSD Warning Lamp
Mirror Folding
|
CVVT & Camshaft Inspection
Continuously variable valve timing (CVVT) Assembly
1.
Inspect the CVVT for smooth rotation.
(1)
Clamp the camshaft using a vise. Be carefu ...
Compressor Description
The compressor is the power unit of the A/C system.
It is located on the side of engine block and driven by a V-belt of the
engine.
The compressor changes low pressure and low temperatur ...
Circuit Diagram
...