Kia Sorento: Power Door Lock Switch Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Removal
Driver Power Window Main Switch
| 1. |
Disconnect the negative battery terminal.
|
| 2. |
Remove the front door trim.
(Refer to Body - "Front door")
|
| 3. |
Remve the screws(Inside:4EA, outside:1EA) from power window switch
assembly (A) and connectors (B).
|
| 4. |
Remove the power window switch assembly (A) from front door trim.
|
Passenger window switch
| 1. |
Disconnect the negative battery terminal.
|
| 2. |
Remove the front door trim.
(Refer to Body - "Front door")
|
| 3. |
Remove the passenger window switch assembly (A) from front door
trim.
|
| 4. |
Remove the passenger window switch assembly (A) from front door
trim.
|
Power Door Lock Actuators Inspection
Front Door Lock Actuator
1.
Remove the front door trim.
(Refer to Body - "Front door")
2.
Remove the front door module.
...
Power Door Lock Switch Installation
Driver Power Window Main Switch
1.
Install the driver power window switch assembly and connectors.
2.
Install the front door trim.
...
See also:
Front Strut Assembly Inspection
1.
Check the strut insulator for wear or damage.
2.
Check rubber parts for damage or deterioration.
3.
Compress ...
IPM Components
Outer Connector (L / M / N / K)
Connector
Pin No.
Description
Active
Remark
K
1
IMS LIN
...
Direct Electro Hydraulic Actuator Coupling Operation
Electronic Coupling
[Inactive]
[Active]
Operation Order
1.
4WD ECU receives CAN signals from the vehicle's sensors.
...
Copyright В© www.ksmanual.com 2014-2024