Kia Sorento: Parking Brake Pedal Assembly Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Parking Brake System / Parking Brake Pedal Assembly Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
|
| 3. |
Remove the junction box.
(Refer to Body Electrical System - "Relay Box(Passenger Compartment"))
|
| 4. |
Disconnect the parking brake switch connector.
|
| 5. |
Remove the parking brake cable mounting nuts (A).
|
| 6. |
Remove the parking brake pedal mounting bolts (A) and nut (B).
|
| 7. |
Remove the parking brake cable the fixing clip (A, B), and then
remove the parking brake pedal.
|
Parking Brake Lever Assembly Adjustment
Parking Brake Lever Stroke Adjustment
1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Apply the brake p ...
Parking Brake Pedal Assembly Installation
1.
Install the holding clip (A, B) after fixing the parking brake
cable.
2.
Install the parking brake pedal, and then install the p ...
See also:
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Warning And Caution Labels
1. Fan caution
2. Radiator cap caution
3. Battery caution
Battery Caution Label Description
Warning / Caution Label (Cont'd)
A.
Keep lighted cigarett ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the intake manifold.
(Refer to Engine Mech ...
Copyright В© www.ksmanual.com 2014-2024