1. |
Install the holding clip (A, B) after fixing the parking brake
cable.
|
2. |
Install the parking brake pedal, and then install the parking
brake pedal mounting bolts (A) and nut (B).
|
3. |
Adjust the parking brake pedal stroke by turning the adjusting
nut (A).
|
4. |
Reconnect the parking brake switch connector.
|
5. |
Install the juncting box.
(Refer to Body Electrical System - "Relay Box(Passenger Compartment"))
|
6. |
Install the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
|
General Information
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying the drive ...
External Amplifier Components
Connector Pin Information
No.
Connector A (26 pin)
Connector B (16 pin)
Connector C (12 pin)
1
Battery +
Right surround speaker +
...
Front Wiper Motor Installation
1.
Install the wiper motor.
2.
Install the crank arm.
Torque :
12.7-17.6Nm (1.3-1.8, kgf.m, 9.4-13.0 lbf. ...