1. |
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the rear tire and wheel.
|
3. |
Remove the rear brake caliper and Rear disc brake.
(Refer to "Rear disc brake removal")
|
4. |
Remove the parking brake cable (B), after removing the fixing
clip (A).
|
5. |
Remove the hub assembly.
(Refer to Driveshaft and axle - "Rear hub - carrier")
|
6. |
Remove the adjuster assembly (B) and the lower return spring (A).
|
7. |
Remove the upper return spring (C) operating lever assembly (D).
|
8. |
Remove the shoe hold down pin (A) and the spring (B) by pressing
and rotating the spring.
|
9. |
Remove the brake shoes (C).
|
Circuit Diagram
...
Circuit Diagram
...
Fuel Tank Air Filter Installation
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped.
In this case, u ...