1. |
Disconnect the negative (-) battery terminal.
|
2. |
Open the sunglass case cover from the overhead console then remove
the 2 screws holding the overhead console. Disconnect the switch connector
(6P) and Map lamp connector (6P), and then remove the overhead console
lamp (A).
|
3. |
Check for continuity between the terminals. If the continuity
is not as specified, replace the sunroof switch.
|
AVN Head Unit Removal
•
Take care not to scratch the center fascia panel and related
parts.
...
Inspection
Lighting Switch Inspection
1.
With the multi function switch in each position, make sure that
continuity exists between the terminals below.
If continuity is no ...
Parking Brake Assembly Installation
Parking Brake Shoe
1.
Install the shoe hold down pin (A) and spring (B) by pressing
and rotating the spring.
2.
Install the ope ...