1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the mounting screws (2EA).
And then remove the overhead console (A).
|
3. |
Remove the overhead console lamp (B) from the head lining after
disconnecting the sunroof switch connector and map lamp switch connector
(A).
|
4. |
If the bulb only should be replaced, replace the bulb after removing
the lens.
|
Positive Crankcase Ventilation (PCV) Valve Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).
...
Rear Oil Seal Removal
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
...
Room Lamp Inspection
1.
Remove the room lamp assembly then check for continuity between
terminals.
[Sunroof]
[General]
...