Kia Sorento: Oil Pump Component
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Hydraulic System / Oil Pump Component
| 1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bush-Housing |
7. Reaction shaft 8. Bush- Reaction shaft 9. Sleeve 10. Flange bolt 11.Bolt |
Oil pump operation flow
| 1. Inhale(Oil filter) 2. Inhale(Valve body) 3. Outlet 4. 26/B operation pressure |
5. 35R/C operation pressure 6. Lubrication 7. Lock up clutch operation pressure 8. Lock up clutch cancellation |
Oil Pump Component Location
1. Automatic transaxle
2. Oil pump assembly
...
Fluid Component Location
1. ATF Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...
See also:
Pressure Sensor Installation
•
Check the cleanliness of the pressure sensor before installation.
...
Cup holder
WARNING - Hot liquids
Do not place uncovered cups with hot liquid in the cup holder while the
vehicle is in motion. If the hot liquid spills, you may burn yourself. Such
a burn to the driver c ...
Rear Driveshaft Reassembly
1.
Wrap tape around the driveshaft splines (TJ side ) to prevent
damage to the boots.
2.
Apply grease to the driveshaft and install the boo ...
Copyright В© www.ksmanual.com 2014-2024