1. |
Before installation, wipe the surface with a clean cloth.
|
2. |
Check the O-rings (A) of the new hydraulic motor (actuators).
|
3. |
Tighten the bolts after install the hydraulic motor (actuators).
|
4. |
Wipe the flowed oil to around the surface with a clean cloth.
|
5. |
Install the coupling assembly.
(Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator
Coupling")
|
Input Speed Sensor Installation
1.
Install in the reverse order of removal.
•
...
Lane Departure Warning System (LDWS) Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the LDWS unit cover (A).
3.
Remove the LDWS ...
Occupant Detection system (ODS) Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front passenger seat ass ...