Kia Sorento: Oil Cooler Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Lubrication System / Oil Cooler Removal
| 1. |
Loosen the drain plug, and drain the coolant. Remove the radiator cap
to help drain the coolant faster.
|
| 2. |
Disconnect the oil cooler coolant hoses (A).
|
| 3. |
Using the SST (09263-2E000), remove the oil filter (A).
|
| 4. |
Loosen the mounting bolt (A) and remove the oil cooler assembly (B).
|
Engine Oil Inspection
1.
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning.
If the quality is visibly poor, replace the oil.
...
Oil Cooler Installation
1.
Apply a light coat of engine oil to the oil cooler packing surface (A),
and then install the oil cooler with fix bolt (B).
Tightening torque:
...
See also:
Front Door Components
1. Door grip handle cover
2. Door inside handle cap
3. Door trim
4. Door belt inner weatherstrip
5. Door module
6. Quadrant inner cover
7. Door belt weatherstrip
8. ...
Using Voice Recognition
Starting Voice Recognition
Shortly press the key on the steering
wheel. Say a command
If prompt feedback is in [ON], then the system will say “Please say a command
after the beep (BEEP)”
...
Emergency Fastening Device (EFD) Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the EFD cover pad (A).
...
Copyright © www.ksmanual.com 2014-2024