Kia Sorento: Oil Cooler Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Lubrication System / Oil Cooler Installation
| 1. |
Apply a light coat of engine oil to the oil cooler packing surface (A),
and then install the oil cooler with fix bolt (B).
|
| 2. |
Apply a light coat of engine oil to the oil filter packing surface (A),
and then install the oil filter.
|
| 3. |
Connect the oil cooler coolant hoses (B).
|
| 4. |
Fill the radiator with coolant and check for leaks.
|
Oil Cooler Removal
1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap
to help drain the coolant faster.
2.
Disconnect the oil cooler coo ...
Oil Pan Removal
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the A/C compressor.
(Refer to Heating, Ve ...
See also:
Air Ventilation Seat Control Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the air ventilation seat control unit (A) after loosening
screws.
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the intake manifold.
(Refer to Engine Mech ...
Front Impact Sensor (FIS) Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replac ...
Copyright В© www.ksmanual.com 2014-2024