1. |
Remove the front muffler (A) after loosening the mounting nuts.
|
2. |
Remove the center muffler (A) after loosening the mounting nuts.
|
3. |
Detch the rubber hanger (A) from the main muffler.
|
4. |
Remove the main muffler (B) after loosening the mounting nuts.
|
5. |
Install in the reverse order of removal.
|
Replacement procedure of center muffler using clamp
1. |
Check that the clamping part of the center muffler assembly is damaged
or deformed.
If the muffler is too corroded to clamp, replace the center muffler
assembly.
|
2. |
Record the gap (A, B, C, D, E, F) between the tail pipe (or tail trim)
and the rear bumper.
[Pipe type]
[Trim type]
[Bumper-integrated trim type]
|
3. |
Remove the catalytic converter & center muffler (A).
|
4. |
Cut the center muffler as the instruction below.
[With dent]
[Without dent]
[A/S muffler]
|
5. |
Install the center muffler.
|
Thermostat Inspection
1.
Immerse the thermostat in water and gradually heat the water.
2.
Check the valve opening temperature.
Valv ...
Fuses
A vehicle’s electrical system is protected from electrical overload damage by
fuses.
This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel
bolster, the other in the en ...
IMS Control Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door")
...