1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the driver's side crash
pad side cover.
|
3. |
After loosening the mounting screws, remove the crash pad lower
panel (A).
|
4. |
Push the lock pin (B), disconnect the diagnosis connector (C).
|
5. |
After loosening the mounting bolts, then remove the reinforce
panel (A).
|
6. |
Remove the driver's side shower duct after loosening the screw.
|
7. |
Disconnect the connector and then remove the mode control actuator
(A) after loosening the mounting screws.
|
8. |
Install in the reverse order of removal.
|
Rear Shock Absorber Removel
2WD
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 ...
Front Hub / Knuckle / Tone Wheel Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
Folder Random
Press the key
Set [
F.RDM] through the
TUNE knob or
key to randomly play songs within
the current folder.
❈ Press F.RDM again to turn off.
Folder Repeat
Press the key
...