Kia Sorento: Master Cylinder Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Brake System / Master Cylinder Removal
| 1. |
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the air cleaner assembly.
G 2.4 GDI (Refer to Engine Mechanical System - "Air clecner")
G 3.3 GDI (Refer to Engine Mechanical System - "Air clecner")
|
| 3. |
Disconnect the brake fluid level switch connector (B), and remove
the reservoir cap.
|
| 4. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
| 5. |
Disconnect the brake tube (A) from the master cylinder by loosening
the tube flare nut.
|
| 6. |
Remove the master cylinder (B) from the brake booster after loosening
the mounting nuts (A).
|
Master Cylinder Components
1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder
...
Master Cylinder Installation
1.
Installation is the reverse of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system - "Brake system B ...
See also:
Closing the tailgate
To close the tailgate, lower and push down the tailgate firmly. Make sure that
the tailgate is securely latched.
WARNING
Make sure your hands, feet and other parts of your body are safely out of
...
Child-protector rear door lock
\
The child safety lock is provided to help prevent children from accidentally
opening the rear doors from inside the vehicle. The rear door safety locks should
be used whenever children are in the ...
Master Cylinder Installation
1.
Installation is the reverse of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system - "Brake system B ...
Copyright В© www.ksmanual.com 2014-2024