1. |
The IPM can be diagnosed by using the GDS. The BCM communicates
with the GDS which then displays inputs and outputs along with codes.
|
2. |
To diagnose the IPM function, select the vehicle model and IPM.
|
3. |
To consult the present input/out value of IPM, "Current DATA".
It provides information of IPM input/output conditions of power supply,
turn signal/brake lamp, headlamp, door locks, outside mirror, wiper,
auto-light and transmitters etc.
|
4. |
To perform functional test on IPM outputs, select "Actuation Test"
|
5. |
To change the "user option" on BCM, select the "User Option" menu
and change the value as below.
|
Heater Core Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater -"Heater Unit")
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS termi ...
Parking Brake Pedal Assembly Adjustment
Parking Brake Pedal Stroke Adjustment
1.
Operate the parking brake pedal through a full stroke over 3 times
for setting the parking cables.
2.
...